FABRIMAP
Pipe spools · Structural steel · Install · Shutdowns

Every activity has a number. Every number has a state.

Fabrimap is the fabrication and installation portal for pipe spools and structural steel. Every cut, weld, bolt-up, test, package and permit is a numbered record with a state, stamped with who did it and when, from the take-off in the shop to the install work package, the shutdown scope and the turnover on site.

01
Drawings & MTO
Register from the model, the isometrics or the drawings
02
Take-off audit
Every cut length checked against the sheet
03
Cut
Pieces cut, heat numbers kept
04
Welder bay
Staged and assigned
05
Fit & tack
Welder and heat each side
06
Weld
Weld-out, repairs tracked apart
07
Quality
Visual, NDE, dimensional, stamps
08
Hydro & paint
Test packages, coating, ship
09
Install
Bag & tag, IWPs, rules of credit
What it does

One register. The whole job reads from it.

A project package holds the assemblies, the parts, the drawings, the connections and the 3D model. Everything below is a view of that package, so a stamp in the shop is a stamp everywhere, and nothing is typed twice.

In the shopPipe and steel
Drawings & MTO

Spool sheets and shop drawings

One sheet per spool or assembly on the Fabrimap template: cut lengths, numbered welds and pieces, BOM, weld summary, revision block. Stamped drawings print with every record on them.

Take-off audit · Cut · Material

Cut list, heat numbers, receiving

Every cut length audited against the sheet. Material received by QR label, heat numbers carried from the stock to the weld. A warehouse list for whatever is in view.

Welder bay · Fit & tack · Weld

Weld log and weld map

Pieces staged by bay; fit-up recorded with the welder and heat each side; weld-out, WPS and repairs tracked apart from first-time work. The detailer's weld map replaces the estimate with the real welds.

Quality · ITP

Stamps, NDE and holds

Visual, dimensional and NDE acceptance stamped on the drawing with initials and time. The inspection and test plan sets the hold and witness points; a rework weld keeps its history.

Hydro & paint

Test packages and coating

Quality-released spools grouped into test packages by pressure, test reports attached, painting recorded, laydown assigned, and the packing slip with the truck it left on.

Steel

Assemblies, modules, bolt-ups

Steel runs through the same stages. Assemblies combine into shop preassemblies or site build-ups; every bolted joint has a torque sheet for the life of the project.

On siteInstall, shutdowns, turnover
Install

Install work packages

Group spools and assemblies into IWPs, see the field weld each needs, release a package when its documents, materials and scaffold are clear, and earn progress by the rules of credit.

Bag & tag · Permits · Scaffold

Constraints before the crew

Bag and tag the kit, request the permits, build the scaffold package from the model with its material list, so a package goes to the field only when the crew can work it.

Turnaround

Shutdown scope

Pick the valves and spools for a shutdown straight off the 3D model, review the scope, and run it through the same cut, weld and quality records as new work.

3D model

The model as the map

Tekla or IFC model in the browser. Click an item to open its drawing, draw a package box round what you circled, colour the model by install status, follow the camera tag by tag.

QR tags · Scan

Every piece carries its number

A printable QR tag per piece, spool, assembly and receiving line. A scan at the laydown or the work face records the next stage from a phone.

Turnover · Reports

Progress you can hand over

Install turnover with every item's status, crew, hours and dates; progress by CWP, system and package; the last seven days and the holds, as a print page or CSV.

For the projectEstimate, training, access
Estimate

Bottom-up estimate

Cut inches, holes, weld inches by fillet size, painted area and tonnes from the register, priced by output per hour, material by section, with the tonne-factor check.

Training

Built-in training

A manual with pictures for every stage, written for the crew, so a new fitter or inspector is stamping correctly on their first shift.

Admin

Logins by role and project

Your shop's administrator issues logins; a client or a subcontractor can be limited to one project. Every record carries the initials of who made it.

Stamp & weld log standard

Five states. Same colours on every sheet.

A fitter, a welder, an inspector and a client all read the same sheet. The colour says where a weld is; the label says who did it and what test it carries.

OpenDrawn, not yet fitted
Fit & tackedFitter has it up
WeldedWelder and WPS recorded
AcceptedVisual or NDE passed
ReworkCut out, who and why kept

Weld labels read BW-3 · W-103 · RT: the weld, the welder, the test. A cut-out weld reads X W-101 so the record keeps the welder who removed it.

Estimating

Priced from the register, not from a tonne factor.

The estimate counts what the shop will actually do. A thousand kilograms of clips costs more to cut and handle than one beam of the same weight, and the estimate says so. The tonne factor is kept as the check, not the method.

ActivityQtyUnitRateHours
Cut beam (saw)638.2cut in40 in/hr16.0
Cut plate (burn)1,219.8cut in30 in/hr40.7
Handle, light < 50 kg134pcs12 pcs/hr11.2
Drill160holes2.5 holes/hr64.0
Shop weld 8 mm1,567.2in33.3 in/hr47.1
Paint, prep + coats46.4m²3.3 m²/hr14.1
Erect & install2.16t8 hr/t17.3
Labour · check 101 hr/t218.2

Every rate is the shop's to change

  • Rates are output per hour, the way a foreman thinks: holes an hour, inches of weld an hour, square metres an hour. Change one and the estimate re-prices; the quantities stay.
  • Weld inches are built joint by joint from each member's section and the connection detail. The audit shows every joint behind every total.
  • Material is bought by weight and priced by section, plate separate from beams. Freight and markup are lines, not percentages hidden in a rate.
  • The hours-per-tonne check sits under the total. If it falls outside the band you hold for that kind of work, the line responsible is on the page above it.

Figures shown are an example steel package with seeded rates.

Services

We do the work, on Fabrimap.

You do not have to run the portal yourself to use it. Send the drawings and get back the deliverables, with the job loaded in Fabrimap so your shop and your client can watch it move.

Pipe spool drawings

From your isometrics, CAD or PCF files: one sheet per spool with cut lengths, numbered welds, BOM and cut list, split to your shop and shipping limits.

Send
Isometrics with field welds, piping spec, support details
Get
Spool sheets, cut list, MTO, weld map, query list

Structural steel detailing

Assembly and single-part shop drawings, bolt and material lists, detailed from your design drawings and typical connections, for industrial plant work.

Send
Design drawings, connection design, piece-mark convention
Get
Shop drawings, lists, the register loaded for the shop

API 650 / 653 tank estimating

New tanks and repairs, estimated bottom-up from the datasheet: shell courses, bottom, roof, nozzles, appurtenances, testing and coating, with every assumption written down.

Send
Datasheet or drawings, nozzle schedule, site conditions
Get
Register, priced estimate, tonne check, assumptions
Start a project

What to send, and what happens next.

Structured files load the project automatically. Flat PDFs take more hand work but still work. No model at all? Fabrimap builds the register from the drawings.

Pipe

For a piping job

  1. IsometricsIssued for construction, one per line, field welds marked. PDF, DWG, or PCF / IDF from your design system.
  2. Piping specificationClass sheets, so wall thickness, fitting type and rating come from the spec.
  3. Limits and conventionsSpool size limits for your shop and truck; your spool and weld numbering if you have one.
Steel

For a steel job

  1. The modelTekla or other, as IFC, exported with bolts and holes if you can. Gives geometry and plant coordinates.
  2. The reportsAssembly list and part list: mark, profile, length, grade, quantity, weight. CSV, Excel or PDF.
  3. The drawingsGA and assembly drawings as PDF, and the weld report if the detailer has one.
Talk to us

Send two or three drawings. See them back in Fabrimap.

The fastest way to judge the portal is to see your own job in it. Send a few isometrics or one steel assembly and we will load them and return the sheets.

Email
craig@fabrimap.com
Craig Haas · Fabrimap · Lodestone Fabrication
Sign in to the portal